Description
WS-C2960L-24PS-LL Catalyst 2960-L Switch
Catalyst 2960L 24 port GigE with PoE, 4 x 1G SFP,
LAN Lite (Asia Pacific Part Number: WS-C2960L-24PS-AP)
10.9% OFF
Cisco Switch WS-C2960L-24PS-AP) Catalyst 2960L 24 port GigE with PoE, 4 x 1G SFP, LAN Lite (Asia Pacific Part Number:
Original price was: ৳ 110,000.00.৳ 98,000.00Current price is: ৳ 98,000.00.
| Product Code | WS-C2960L-24PS-LL |
| IOS | LAN Lite |
| Forwarding bandwidth | 28 Gbps |
| Switching bandwidth | 56 Gbps |
| 10/100/1000 Ethernet Ports | 24 PoE+ Ports |
| Available PoE Power | 195W |
| Uplink Interfaces | 4 x 1G SFP |
| Fanless | Y |
| DRAM | 512 MB |
| Flash memory | 256 MB |
| Dimensions (H x D x W) | 1.73 x 10.45 x 17.5 in. (4.4 x 26.5 x 44.5 cm) |
| Net Weight | 7.63 lb (3.46 kg) |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Cisco CBS350-24FP-4X
Original price was: ৳ 125,000.00.৳ 118,000.00Current price is: ৳ 118,000.00.Add to cartCBS350-24FP-4X Specification
Feature Description Capacity in Millions of Packets per Second (mpps) (64-byte packets) 95.23 Switching Capacity in Gigabits per Second (Gbps) 128.0 Total System Ports 24 Gigabit Ethernet +
4 x 10GRJ-45 Ports 24 x Gigabit Ethernet Combo Ports (RJ45 + Small form-factor pluggable [SFP]) 4 x SFP+ Packet Buffer 1.5 MB Unit dimensions (W x D x H) 445 x 345 x 44 mm (17.5 x 13.59 x 1.73 in) Layer 3 IPv4 routing Wirespeed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wirespeed routing of IPv6 packets Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for classless interdomain routing RIP v2 Support for Routing Information Protocol version 2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL) DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Quality of Service Priority levels 8 hardware queues Scheduling Strict priority and Weighted Round-Robin (WRR) Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing Congestion avoidance A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization iSCSI traffic optimization A mechanism for giving priority to iSCSI traffic over other types of traffic Green (power efficiency) Energy Detect Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up Cable length detection Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables. EEE Compliant (802.3az) Supports IEEE 802.3az on all copper Gigabit Ethernet ports Disable port LEDs LEDs can be manually turned off to save on energy Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up) Time-based PoE PoE power can be on or off based on user-defined schedule to save energy General Jumbo frames Frame sizes up to 9K bytes. The default MTU is 2K bytes MAC table 16K addresses Hardware USB slot USB Type-A slot on the front panel of the switch for easy file and image management Buttons Reset button Cabling type Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T LEDs System, Link/Act, PoE, Speed Flash 256 MB CPU 800 MHz ARM DRAM 512 MB Environmental Storage temperature -13° to 158°F (-25° to 70°C) Operating humidity 10% to 90%, relative, noncondensing Storage humidity 10% to 90%, relative, noncondensing Warranty Limited lifetime with next business day advance replacement (where available) Package Contents -
CISCO CBS350-24FP-4G
Original price was: ৳ 95,000.00.৳ 89,000.00Current price is: ৳ 89,000.00.Add to cartCBS350-24FP-4G Specification
Feature Description Capacity in Millions of Packets per Second (mpps) (64-byte packets) 41.66 Switching Capacity in Gigabits per Second (Gbps) 56.0 Total System Ports 28 x Gigabit Ethernet RJ-45 Ports 24 x Gigabit Ethernet Combo Ports (RJ45 + Small form-factor pluggable [SFP]) 4 x SFP Packet Buffer 1.5 MB Unit dimensions (W x D x H) 445 x 345 x 44 mm (17.5 x 13.59 x 1.73 in) Layer 3 IPv4 routing Wirespeed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wirespeed routing of IPv6 packets Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for classless interdomain routing RIP v2 Support for Routing Information Protocol version 2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL) DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Quality of Service Priority levels 8 hardware queues Scheduling Strict priority and Weighted Round-Robin (WRR) Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing Congestion avoidance A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization iSCSI traffic optimization A mechanism for giving priority to iSCSI traffic over other types of traffic Green (power efficiency) Energy Detect Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up Cable length detection Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables. EEE Compliant (802.3az) Supports IEEE 802.3az on all copper Gigabit Ethernet ports Disable port LEDs LEDs can be manually turned off to save on energy Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up) Time-based PoE PoE power can be on or off based on user-defined schedule to save energy General Jumbo frames Frame sizes up to 9K bytes. The default MTU is 2K bytes MAC table 16K addresses Hardware USB slot USB Type-A slot on the front panel of the switch for easy file and image management Buttons Reset button Cabling type Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T LEDs System, Link/Act, PoE, Speed Flash 256 MB CPU 800 MHz ARM DRAM 512 MB Environmental Storage temperature -13° to 158°F (-25° to 70°C) Operating humidity 10% to 90%, relative, noncondensing Storage humidity 10% to 90%, relative, noncondensing Warranty Limited lifetime with next business day advance replacement (where available)
Reviews
There are no reviews yet.